Rising Film Evaporator
INDUSTRIAL FOOD TECHNOLOGY
FT22 Rising Film Evaporator
The costs incurred by the length of time taken, the large quantities of raw materials required and the interruption of the production process mean it is disadvantageous to test new products using full-scale production equipment.
The Armfield evaporator processes samples as small as 2.0 litres under conditions identical to those in production, sufficient to reveal the effect of heating on any ingredients newly introduced to the recipe.
As well as investigation of the effect on organoleptic and physico-chemical properties, the equipment can be used to prepare product for taste trials on a daily basis to ensure the quality of incoming raw material is consistent.
• Nominal throughput only 10l/h
• Single tube heat exchanger
• Integral CIP system
• Integral control console
• Data logging and analysis included
> Small quantities of liquid products can be concentrated
> Easily cleaned and maintained
> Low product usage eases the disposal of waste
The single tube-in-jacket evaporator replicates industrial units which often contain scores of much longer tubes within the steam space. The component parts of the industrial process have been scaled down, feed tank, vapour/liquid separator, condenser, concentrate tank, condensate tank, CIP pump and vacuum pump, all manufactured from hygienic materials such as stainless steel, PTFE and glass.
The system is supported within a stainless steel framework and requires only connection to suitable steam, electrical and water services for operation.
Only 0.65m² of floor space is required to install the evaporator and it has been designed to fit easily into a room of standard height.
Schematic diagram of the FT22enlarge
Receiver being cleaned using integral CIP facilityenlarge
> Juices (fruit and vegetable)
> Milk and milk products
> Extracts (non-flammable)
Evaporator tube length: 1.36m
Heat transfer area: 0.06m2
Max. evaporation rate: 10l/h
Max. steam consumption: 15 kg/hr
Max. steam pressure (working): 1.7 bar
Condenser area: 0.17m2
Feed tank capacity max.: 30 litres
Concentrate collecting tank capacity: 5 litres
Condensate collecting tank capacity: 5 litres
CIP Pump (flexible impeller): 8l/m @ 20ft H20
System vacuum: 225mm Hg abs (increased when pump heads in series)
UOP10 Steam Generator
Provides an adequate supply of steam as the heat transfer medium.
FT22-A: 220-240V/1ph/50Hz (3kW)
FT22-B: 120V/1ph/60Hz (3kW)
A computer runing Windows 98 or above, with a USB port.
Gross weight: 330kg