Wählen Sie!


  • Verfügbarkeit Auf Bestellung
  • Hersteller Armfield
  • Artikelnr. FT85
  • Produkt angesehen: 21120




Der Steriltank Armfield FT85 kann UHT-verarbeitetes Produkt für die sterile Abfüllung zu einem späteren Zeitpunkt speichern. Es eliminiert Verluste an Produkt im Zusammenhang mit Abfüllanlagen, denen für Pufferung an kontinuierlichen Pilotanlagen die Kapazität fehlt. Der Steriltank befindet sich zwischen UHT-Anlagen und dem FT83 Steril-Abfüllsystem und ist mit Gefässgrössen von 10 bis 30 Litern erhältlich (andere Grössen auf Anfrage). Es ist für den Betrieb mit Armfield-Systemen ausgelegt, kann aber mit anderen Geräten betrieben werden.


  • 10-30-litre vessel volume
  • Touchscreen display
  • Variable sterilisation protocol control from touchscreen display
  • Clean-in-place capability
  • Can be integrated into Armfield or other UHT/filling systems
  • Automated process operations
  • Product agitation using a sterile gas supply
  • Steam sterilisable by external or integral supply (FT85-10)
  • Continuous level sensing


  • Sterile product can be stored until required
  • No product wastage during filling
  • Small footprint and mobile
  • FT85 can be used for non-sterile processing


The FT85 is controlled via a touchscreen mounted on the unit with modes for vessel filling, vessel emptying (bottling), sterilisation and cleaning. Vessel volumes range from 10 to 30 litres.

The UHT/filling system and the FT85 are first sterilised in separate processes. Time and temperature for the sterilisation process is set from the touchscreen. Once sterile, the UHT system is then placed in process mode and the FT85 into vessel fill mode. Sterilised product then fills the vessel.

Once processing is complete flow bypasses the vessel and is then stopped. Sterile gas can be pumped into the vessel to provide product mixing. The vessel is then placed in Vessel Empty mode and positive head pressure on the vessel (sterile gas) is used to feed the product to the filler. The FT85 is cleaned in place using a spray ball with CIP pumping provided by the UHT system.

Steam Generator (FT85-10)

  • FT85-10 enables sterilisation of the vessel without the need for an external steam supply.

Technical Specifications

Vessel capacity:10-30 l (contact us for other sizes)
Max sterilisation temp:140°C


The armSOFT™ software displays the equipment flow diagram with readings displayed for all sensors. Time/ temperature sterilisation protocols are set or recalled from memory. There are also controls for feed pump stop/start and speed. A data tab offers several options for processing and displaying the data from the equipment in the form of graphs and results tables. Results are saved in a log, which can be viewed and manipulated with the armSOFT™ Results Viewer, or they can be exported to a generic spreadsheet format for further analysis.


Electrical supply:Single-phase (see ordering codes)
Air supply:6 bar with minimal air consumption
Steam supply:External steam supply required if FT85-10 option is not specified:4 bar @ 4 kg/hr
FT85-10:This option requires a mains or softened water supply:1 bar @ 2 l/min

Ordering codes


Overall dimensions


Shipping specification

Gross weight:200kg

+ Bewertung

Hinweis: HTML ist nicht verfügbar!
    Weniger Gut           Gut

Haben Sie Fragen über Steriltank?